Renaissance Fittings & Piping Inc is a well-known manufacturer, supplier and exporter of Titanium Rods, where the strength of this difference is indistinguishably underneath its parent alloy. In addition, it also has rupture hardiness and greater weariness strength characteristics. Titanium Rods is known comparatively all over the world as a high-strength and low-weight material, which has approximately 60 percent of steel in it. The High strength makes it a perfect selection for a lot of applications, where the low weight is particularly measured up to stainless steel. Chemical industry, skins applications and Air frame applications are some

to name a few where highest formability is required throughout modest strength.

For projects in Cedar Rapids, Iowa

Titanium rods in Cedar Rapids, Iowa

Titanium Round Rods, Titanium Square Rods, Titanium Flat Rods, Titanium Hex Rods, Manufacturer & Exporter in India.

If your workshop or project office is in Cedar Rapids, we can supply Titanium rods as part of a wider Titanium order. Renaissance Fittings & Piping Inc. manufactures titanium products under ISO 9001 and ships with the documents your receiving team expects.

ISO 9001 CertifiedWorldwide ExportEN 10204 3.1 DocsProject Logistics

Ordering Titanium rods for Cedar Rapids, Iowa

Most Titanium rods orders for Cedar Rapids, Iowa start with a short list of sizes, schedules, and grades. We check those against stock and mill programmes, then confirm what we can ship and when. Where a substitution makes sense for corrosive service, we say so up front rather than leaving it to arrival.

If Titanium rods must meet a specific ASTM, ASME, or EN call-out for work in Cedar Rapids, Iowa, tell us early. Renaissance Fittings & Piping Inc. will review the spec, arrange TPI if needed, and plan shipment around your programme.

Common work we see in Cedar Rapids, Iowa

heavy fabrication workshops
water treatment facilities
EPC and project contractors
pharma and hygienic process lines
refinery turnarounds

What you can expect from us

export packing lists and customs-ready paperwork
practical help on grade or size substitutions
line-item tagging and segregated packing
ISO 9001 manufacturing with clear QA records

Overview

Product summary and supply information for this location.

We are a leading high quality Titanium rods manufacturer and exporter in the world.

Specifications & Applications

Technical details, grades, sizes, and application information.

FORM :

Round, Square, Flat, Hex

Range :

3mm to 300mm

Standard :

ASTM B348 , ASTM F67, ASTM F136 , AMS4928

Grade :

Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Widely used grades :

ASTM Grade	Alloy	DIN	UNS
Grade 1	Commercially pure	3.7025	R50250
Grade 2	Commercially pure	3.7035	R50400
Grade 3	Commercially pure	3.7055	R50550
Grade 4	Commercially pure	3.7065	R50700
Grade 5	Ti-6Al-4V	3.13.25%64/5	R56400
Grade 6	Ti-5Al-2.5Sn	3.13.25%14	R54520
Grade 7	Ti-0.15Pd	3.7235	R52400
Grade 9	Ti-3Al-2.5V	3.13.25%95	R56320
Grade 12	Ti-0.3Mo-0.8Ni	3.13.25%05	R53400
Grade 23	Ti-6Al-4V ELI		R56401

Dimension :

Diameter - 3.0 mm to 300 mm (tolerance h7 to h13)
Length - 1000 mm to 6000 mm, or cut to size
Titanium flat bar, square bar, rectangle bar, hexagonal bar available by requirement.

Tolerance of diameter :

Diameter (mm)	h7	h8	h9	h10	h11	h12	h13
Diameter (mm)	Tolerance precision (µm)
3 Max	10	14	25	40	60	100	140
3~6	12	18	30	48	75	120	180
6~10	15	22	36	58	90	150	220
10~18	18	27	43	70	110	180	270
18~30	21	33	52	84	130	210	330
30~50	25	39	62	100	160	250	390
50~80	30	46	74	120	190	300	460
80~120	35	54	87	140	220	350	540
120~180	40	63	100	160	250	400	630
"h" stands for a tolerance range (-x, +0), on the contrary, "H" stands for a tolerance (-0, +x)

General temper condition :

Vacuum annealed

Special alloy for titanium rod and titanium bar :

• Ti-Ni (memory alloy)
• Ti-Nb (superconducting and medical alloy)
• Ti-13Nb-13Zr (medical alloy)
• Ti-6Al-7Nb (medical alloy)
• Other titanium grade and titanium alloy are available by request

Surface treatment :

Machined / centerless grounded

Primarily used specification for titanium rod and titanium bar :

• Industry - ASTM B348
• Medical - ASTM F67, ASTM F136
• Aerospace - AMS 4928

Other places and products you may want to check while putting a package together.

Titanium rods in other regions

Parent regions for the same product.

Other cities in Iowa

Titanium rods pages in nearby cities.

Related types and sizes

Other Titanium options for Cedar Rapids, Iowa.

Other products for Cedar Rapids, Iowa

Flanges, fittings, pipes, and related categories.

Catalog and contact

Technical pages, quotes, and main site links.

Available for supply in Cedar Rapids, Iowa

This page confirms Titanium rods availability for buyers in Cedar Rapids, Iowa. For price quotations, MTCs, and project deliveries, use the enquiry form or contact our export team.

Common questions — Cedar Rapids, Iowa

Common questions about pricing, supply, and documentation for this location.

What is the price of Titanium rods in Cedar Rapids, Iowa?

Pricing for Titanium rods depends on grade, size, quantity, and inspection scope. Send your MTO or line list through the enquiry form and we will reply with a quotation covering lead time, Incoterms, and EN 10204 documentation for Cedar Rapids, Iowa.

Do you supply Titanium rods to Cedar Rapids, Iowa?

Yes. We supply Titanium rods and related Titanium for buyers in Cedar Rapids, Iowa, with ISO 9001 controls and heat-number traceability.

Which certificates are provided for Titanium rods shipments to Cedar Rapids, Iowa?

Most shipments include EN 10204 3.1 mill test certificates, packing lists, commercial invoices, and a certificate of origin. PMI and third-party inspection can be arranged when your project needs them.

How fast can Titanium rods be delivered to Cedar Rapids, Iowa?

Lead time depends on grade, size, quantity, and mill availability. After we review your requirement for Cedar Rapids, Iowa, we share a realistic manufacturing and dispatch schedule.