6082 aluminium bar is one of the more admired alloys in its series (alongside alloys 6005, 6061, and 6063). The alloy and its various tempers are covered by the following standards - EN 485-2, EN 573-3, EN 754-2, EN 755-2, and ISO 6361. The alloy composition of 6082 aluminium bar is 95% of Aluminium, 4% of Silicon Carbide, and 1% max of Aluminium Oxide. And the typical material properties for Aluminium Bar 6082 include2.71 g/cm3, or 169 lb/ft3 of Density, 71 GPa or 10 Msi of Young's modulus, 140 to 330 MPa or 20 to 48 ksi of Ultimate tensile strength, 90 to 280 MPa or 13 to 41 ksi of Yield strength, 23.1 μm/m-K of Thermal Expansion, and 575 °C or 1070 °F of Solidus.

For projects in Okinawa, Japan

Aluminium bar 6101 in Okinawa, Japan

EN 485-2, EN 573-3, EN 754-2, EN 755-2 Aluminium bar 6101, manufacturer and Exporters of in India.

Whether the job sits in an industrial cluster in Okinawa or forms part of a wider package, we can supply Aluminium bar 6101 with the Aluminium detail your engineers expect. PMI, ultrasonic testing, and EN 10204 documents are available on request.

ISO 9001 CertifiedWorldwide ExportEN 10204 3.1 DocsProject Logistics

Ordering Aluminium bar 6101 for Okinawa, Japan

When Aluminium bar 6101 is part of a larger aluminium products package for Okinawa, Japan, we can consolidate lines so freight and paperwork stay manageable. Share your MTO or line list and we will map what we can manufacture together.

If Aluminium bar 6101 must meet a specific ASTM, ASME, or EN call-out for work in Okinawa, Japan, tell us early. Renaissance Fittings & Piping Inc. will review the spec, arrange TPI if needed, and plan shipment around your programme.

Common work we see in Okinawa, Japan

HVAC and building services
petrochemical plants
food and beverage lines
oil and gas projects
mining and mineral plants

What you can expect from us

third-party inspection before dispatch
EN 10204 3.1 / 3.2 mill test certificates
heat-number traceability through to shipment
export packing lists and customs-ready paperwork

Overview

Product summary and supply information for this location.

We are a leading high quality Aluminium bar 6101 manufacturer and exporter in the world.

Specifications & Applications

Technical details, grades, sizes, and application information.

Available Shapes

• Flats , hex , round & square.
• Tempers: T6, T61

Specifications

ASTM B317/B317M

Typical Chemical Composition %
Weight %	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	B	Each	Total
Minimum	0.30				0.35
Maximum	0.70	0.50	0.10	0.03	0.80	0.03	0.10	-	0.06	0.03	0.10

Remainder Aluminium

Typical Mechanical Properties
Temper	Tensile					Hardness
	Ultimate		Yield		Elongation	Brinell
	KSI	MPA	KSI	MPA	%
T6	29	200	25	172	15	71
T61	15	103	8	55

Related Product Keywords

Common search terms and product variants associated with this supply page.

aluminium 7075 barsaluminium 7075 T6 barsaluminium 7075 T651 barsALUMINIUM 6082 T651 BARSALUMINIUM 6082 T6 BARSaluminium aerospace BARSaluminium 5083 bars7075 aluminium manufacturerALUMINIUM 6061 T651 BARSALUMINIUM 6061 T6 BARSALUMINIUM 5083 BARSALUMINIUM 5083 H111 BARS5083 ALUMINIUM BARS6061 ALUMINIUM BARS2014 ALUMINIUM BARS2024 ALUMINIUM BARS6063 alUMINIUM BARS7050 ALUMINIUM BARS2011 ALUMINIUM BARS6063 T6 BARS EXPORTER7075 HOLLOW BARS MANUFACTURER7075 T651 HOLLOW BARS MANUFACTURER7075 T6 HOLLOW BARS MANUFACTURER6061 HOLLOW BARS MANUFACTURER6061 T6 HOLLOW BARS MANUFACTURER6061 T651 HOLLOW BARS MANUFACTURER6082 HOLLOW BARS MANUFACTURER6082 T6 HOLLOW BARS MANUFACTURER6082 T651 HOLLOW BARS MANUFACTURER6063 HOLLOW BARS MANUFACTURER6063 T6 HOLLOW BARS MANUFACTURER6063 T651 HOLLOW BARS MANUFACTURER5083 HOLLOW BARS MANUFACTURER5083 H111 HOLLOW BARS MANUFACTURER5083 T'O' HOLLOW BARS MANUFACTURERCOMPONENTS MACHINED FROM BARSALUMINIUM FORGED BARS6061 T6 FORGED RINGS6082 T6 FORGED RINGS6061 T651 FORGED RINGS6082 T651 FORGED RINGS

Other places and products you may want to check while putting a package together.

Aluminium bar 6101 in other regions

Parent regions for the same product.

Related types and sizes

Other Aluminium options for Okinawa, Japan.

Other products for Okinawa, Japan

Flanges, fittings, pipes, and related categories.

Catalog and contact

Technical pages, quotes, and main site links.

Available for supply in Okinawa, Japan

This page confirms Aluminium bar 6101 availability for buyers in Okinawa, Japan. For price quotations, MTCs, and project deliveries, use the enquiry form or contact our export team.

Common questions — Okinawa, Japan

Common questions about pricing, supply, and documentation for this location.

What is the price of Aluminium bar 6101 in Okinawa, Japan?

Pricing for Aluminium bar 6101 depends on grade, size, quantity, and inspection scope. Send your MTO or line list through the enquiry form and we will reply with a quotation covering lead time, Incoterms, and EN 10204 documentation for Okinawa, Japan.

Do you supply Aluminium bar 6101 to Okinawa, Japan?

Yes. We supply Aluminium bar 6101 and related Aluminium for buyers in Okinawa, Japan, with ISO 9001 controls and heat-number traceability.

Which certificates are provided for Aluminium bar 6101 shipments to Okinawa, Japan?

Most shipments include EN 10204 3.1 mill test certificates, packing lists, commercial invoices, and a certificate of origin. PMI and third-party inspection can be arranged when your project needs them.

How fast can Aluminium bar 6101 be delivered to Okinawa, Japan?

Lead time depends on grade, size, quantity, and mill availability. After we review your requirement for Okinawa, Japan, we share a realistic manufacturing and dispatch schedule.